First before you do everything follow my steps carefully!
WARNING!: BEFORE DOING ALL OF THESE DOWNLOAD YOUR PHONE'S DRIVERS ON PC AND INSTALL THEM FIRST BEFORE CONTINUING!
1. Open SP Flash tool on your pc.
2.Switch your phone off / remove the battery from the phone to confirm that it's off,
3.plug your phone to the pc using a data cable
4.Load the scatterfiles
5.click on download
OR
If you find it difficult just go to youtube through this link below
https://www.youtube.com/watch?v=LeZgLNj-fck
Guys don't find me so offending if i don't reply on anyone's comment i'm ever busy but i'mma attend to you all and if you want to know how to extract scatterfiles, follow my lead usng mtk droid tools, well just follow my lead
1.Connect your phone to the pc using a data cable and put it on debug mode.
2. Open adb terminal or console in mtk droid tools, if it cannot then open mtk droid tools itself and click were it's written adb terminal.
3.When the adb terminal opens type "adb devices"
(you'll see the list of your device showing if not then check your data cable connection)
4.Once your device shows then type "adb shell $ cat /proc/atd"
5.Your scatterfiles' contents will show
6. To save them type"$ cat /proc/atd > /sdcard/firmware.inf"
7.Now put your phone in storage mode beacause the scatterfiles are now located in your phone, open the phone window and copy the scatterfiles on the desktop or somewhere near.
8.Open mtk rom studio to convert the scatterfiles.
9.Locate the scatter files and wait for a little while.
10. Your scatterfiles will be in a folder once they are done converting
There you go!! YOU HAVE COMPLETED!!
